MAD-2000

SUN BRAKE-DISC ALIGNER

  • Accurate on-car brake-disc alignment
  • More opportunity to offer servicing of brakes
  • One-step cutting process in 5 minutes
Aligning brake-discs on the car Using the MAD 2000 you can machine a brake-disc so that it displays little or no deviation when measured from a line running through the locating lugs of the brake caliper parallel to the brake-disc. The result is a vibration-free brake-disc. Thanks to the MAD 2000 there is no longer any need to dismantle the brake discs. This leads to considerable savings in time, which is good for you and your customers.
MAD 2000 Technical Specifications Disk Lathe Unit Storage case (L x W x H) Gross weight Net weight Max. brake-disc thickness Max. skim-off per side Setting of vernier button Feed speed Cutter plates Number of cutting edges Feed motor Electrical specifications Power

335 x 245 x 215 mm 15 kg 6.4 kg 40 mm 0.2 mm 0.1 mm 10 mm/min. hard-steel 6 Berger type synchro country-specific 3-Watt
Drive Unit Storage case (L x W x H) Gross weight Working height (min/max) Driveshaft speed Motor reducer Electrical specifications Power

900 x 385 x 300 mm 40 kg 1000/1200 mm 98 RPM Carpanelli/Rehfuss country-specific 0.37 kW

Documenten

Geen documenten beschikbaar.

ROM’s

Geen ROMs gevonden.

Diskettes

Geen diskettes gevonden.